Method of cooling ultimate CPU ... It is liquid nitrogen cooling.

I experimented by the cooperation of Mr. Hisashi and Mr. elan at this time.

	This is a head for the liquid nitrogen cooling which I used. FH10040 of the alpha company was enclosed with an acrylic board. Mr. KENDON's copper plate and the pyramid buffer are installed. Moreover, an acrylic board and the buffer board are insulated from heat with the styrene board of 5mm thickness. A possible point reinforces two styrene boards and insulation is reinforced repeatedly.
	This is an injection entrance of liquid nitrogen. Pin of FH10040 in the vicinity of the injection entrance was cut.
	It is a jar of liquid nitrogen. They are considerably large and are heavy.:-)
	CPU and the pillow were set in MB.
	Liquid nitrogen is moved to the cup. The container of the CupNoodle is also insulation and is just good. :-)
	Liquid nitrogen is poured by using the tray of the styrene.
	It is beginning of the experiment.
	From the left to temperature of vicinity of chip set and SLOT A regulator and CPU. The temperature indicates -200 degree though PC is operating.
	It is an image after the experiment ends. The head became because of the frozen be dewy and the pillow became pure-white.

Liquid nitrogen can cool Athlon of a terrible calorific value to the limit.